Haldor Topsøe uses neutrons to improve performance of cells for hydrogen production

Haldor Topsøe, a world leader in the development and manufacture of catalysts and the design of process plants for the chemical and petrochemical industries, used neutrons at MLZ through SINE2020.

Haldor Topsøe Haldor Topsøe

Electricity from renewable sources (such as solar energy) is used by SOECs to produce hydrogen (H2). The hydrogen can then be stored for later use as a fuel. © (left image) Ceinturion / Wikimedia Commons

, 07/02/2017

Haldor Topsøe is a world leader in the development and manufacture of catalysts and the design of process plants for the chemical and petrochemical industries.

The production of hydrogen is important as it is a clean fuel and easy to store. In this view, Haldor Topsøe is developing solid oxide electrolysis cells (SOECs) for hydrogen production. SOECs are a rather competitive solution for small scale hydrogen production.

Neutrons see hydrogen deep inside materials

Haldor Topsøe Haldor Topsøe The experiment revealed interesting features that HALDOR-TOPSØE had not considered before seeing the results of neutron imaging. The arrows indicate the inhomogeneities identified within the stack.

The experiment revealed interesting features that HALDOR-TOPSØE had not considered before seeing the results of neutron imaging. The arrows indicate the inhomogeneities identified within the stack.

The stacks available in the market may suffer from a performance loss when used over prolonged periods of time. This is due to the physical stress that may weaken the connection between individual layers of a stack.

After consultation, the SINE2020 Industry Coordinators advised the team from Haldor Topsøe to use neutron imaging in the ANTARES instrument at the Maier-Leibnitz Zentrum (MLZ) in Germany. Neutron imaging is the most appropriate technique for this case, as it is able to penetrate centimetres of metal without damaging it, and it can “see” hydrogenated materials.

Haldor Topsøe performed neutron radiography and tomography investigations at MLZ for free, through the SINE2020 Industry Activities . The researchers were able to identify hitherto unknown features within the stack.

Christoffer Tyrsted, who is Research Scientist at Haldor Topsøe, stated:

“All the way through we received good and competent feedback from the parties. […] The experiments revealed other interesting features we had not considered before obtaining the data.”

Your company can apply for free experiments

Would you like to use neutrons for advanced characterization of your material or component, for free? You’re still in time!

Applications are accepted anytime and will be reviewed continuously. The decision on the feasibility and the appropriate facility to conduct measurements will be announced no later than one month after receiving your request.

SINE2020 offers the following:

  • Preliminary consultations via SINE2020 Liaison Officers with scientific experts in your field.
  • Support in defining, preparing and performing experiments at the research facilities.
  • Assistance with data analysis and result interpretation.

Join Europe’s companies in benefiting from the information neutrons can provide you!

Download

support

To apply for free test measurements please fill in the form on our website .

Back to previous page